桅杆攀爬工作平台CE认证- EN 1495:1997+A2:2009/AC:2010 详解-MD

上海郜盟专业CE认证为您解读

1、桅杆攀爬工作平台欧盟CE认证指令

MD机械指令：2006/42/EC

2、桅杆攀爬工作平台欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN 1495:1997+A2:2009/AC:2010 Lifting platforms - Mast climbing work platforms起重平台-桅杆攀爬工作平台

3、EN 1495:1997+A2:2009/AC:2010 适用范围：

1.1 This standard specifies the special safety requirements for Mast Climbing Work Platforms (MCWP) which are temporarily installed and are manually or power operated and which are designed to be used by one or more persons from which to carry out work. The vertical moving components (work platform) are also used to move those same persons and their equipment and materials to and from a single boarding point. These restrictions differentiate MCWPs from Builder's hoists. The standard can also be used for permanently installed MCWP. 1.2 This standard is applicable to work platforms elevated by rack and pinion and guided by and moving along their supporting masts, where the masts may or may not require lateral restraint from separate supporting structures. 1.3 This standard is applicable to any combination of the following alternatives: One or more masts; Mast tied or untied; Mast of fixed or variable length; Masts vertical or inclined between 0° and 30° to the vertical; Masts which are standing or hanging; Movable or static base (chassis, or base frame); Manually or power operated elevation; Towed or self powered ground travel on site, excluding road traffic regulation requirements; Driven using electric, pneumatic or hydraulic motors. 1.4 This standard identifies the hazards arising during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards and for the use of safe working practices. 1.5 This standard does not specify the requirements for dealing with the hazards involved in the manoeuvring, erection or dismantling, fixing or removing of any materials or equipment which are not part of the Mast Climbing Work Platform (MCWP). Neither does it deal with the handling of specific hazardous materials. 1.6 This standard does not specify the requirements for delivering persons and materials to fixed landing levels. Such equipment is referred to as lifts or hoists and are dealt with by other standards. 1.7 This standard does not include Mobile Elevating Work Platforms (MEWPs) according to EN 280, Suspended access equipment according to # EN 1808$ or Lifting tables according to EN 1570.

1.1本标准规定了桅杆攀爬工作平台（MCWP）的特殊安全要求，该平台临时安装，手动或电动操作，设计用于一名或多名人员进行作业。垂直移动部件（工作平台）也用于将这些人员及其设备和材料移动到单个登机点或从单个登机点移动。这些限制将MCWPs与建筑商的起重机区分开来。该标准也可用于永久安装的MCWP。1.2本标准适用于由齿条和小齿轮提升并由其支撑杆引导并沿其移动的工作平台，其中，杆可能需要或可能不需要单独支撑结构的横向约束。1.3本标准适用于以下备选方案的任何组合：一个或多个桅杆；桅杆系紧或解开；固定或可变长度桅杆；垂直或倾斜于垂直方向0°至30°的桅杆；直立或悬挂的桅杆；可移动或静态底座（底盘或底架）；手动或电动升降；现场牵引或自供电地面旅行，不包括道路交通法规要求；使用电动、气动或液压马达驱动。1.4本标准确定了此类设备寿命各阶段产生的危险，并描述了消除或减少这些危险以及使用安全工作实践的方法。1.5本标准未规定处理不属于桅杆攀爬工作平台（MCWP）一部分的任何材料或设备的操纵、安装或拆卸、固定或移除所涉及的危险的要求。它也不涉及特定危险材料的处理。1.6本标准未规定将人员和材料运送至固定着陆层的要求。此类设备称为升降机或提升机，由其他标准处理。1.7本标准不包括符合EN 280的移动升降工作平台（MEWPs）、符合#EN 1808$的悬挂式进入设备或符合EN 1570的升降台。