EN 1154:1996/A1:2002/AC:2006控制门的关闭装置CE认证详解-上海郜盟

控制门的关闭装置ce认证标准

EN 1154:1996/A1:2002/AC:2006

Building hardware Controlled door closing devices - Requirements and test methods

建筑五金-控制门的关闭装置-要求和试验方法

This standard specifies requirements for controlled door closing devices for swing doors, such devices being mounted on or in the frame, on or in the door, or in the floor.

本标准规定了平开门用可控闭门装置的要求，此类装置可安装在门框上或门框内、门扇上或门扇内，或安装在地面上。

The scope is limited to manually operated door closing devices where the energy for closing is generated by the user upon opening the door, such that when the door is released, it returns to a closed position, in a controlled manner.

本标准适用范围仅限于手动操作的闭门装置，其闭门能量由使用者开门时产生，使门扇在松开后以受控方式回复至关闭位置。

Devices such as spring hinges, which do not exert a checking control during door closing, are outside the scope of this standard.

弹簧铰链等在闭门过程中不具备缓冲控制功能的装置，不属于本标准适用范围。

Door closing devices (door closers) manufactured in accordance with this standard are recommended for use wherever there is a requirement for reliable closing control of a door.

建议凡需要对门扇实现可靠闭合控制的场合，均使用符合本标准制造的闭门装置（闭门器）。

Door closers for use on fire/smoke doors need additional attributes in order to contribute actively to meeting the essential safety requirements in case of fire, either independently or as part of a complete door assembly.

用于防火 / 防烟门的闭门器需具备附加特性，以便在火灾情况下独立或作为完整门体组件的一部分，积极助力满足基本安全要求。

These additional requirements for door closers for use on a fire/smoke door assembly are specified in normative Annex A.

针对防火 / 防烟门组件用闭门器的上述附加要求，在规范性附录 A 中作出规定。

Door closers incorporating electrically powered hold-open mechanisms, for use on fire/smoke door assemblies, are covered by EN 1155.

配备电动保持开启机构、用于防火 / 防烟门组件的闭门器，适用 EN 1155 标准。

Door closers incorporating door coordinator devices (with or without electrically powered hold-open devices) are covered by EN 1158.

配备门顺序器（带或不带电动保持开启装置）的闭门器，适用 EN 1158 标准。

控制门的关闭装置ce认证法规

控制门的关闭装置产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

控制门的关闭装置ce认证模式

有且仅有1个认证：模式 1， 由欧盟公告机构进行测试和工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.