EN 13163:2012+A1:2015工厂制膨胀聚乙烯(EPS)产品CE认证详解-上海郜盟

工厂制膨胀聚乙烯(EPS)产品ce认证标准

EN 13163:2012+A1:2015

Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification

建筑物用隔热产品-工厂制膨胀聚乙烯(EPS)产品-规格

This European Standard specifies the requirements for factory made expanded polystyrene products, with or without rigid or flexible facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards or rolls or other preformed ware (flat, tapered, tongue and grooves.shiplap, profiled etc.).

本欧洲标准规定了工厂生产的膨胀聚苯乙烯制品(无论是否带有硬质或柔性饰面或涂层)的各项要求，这些制品用于建筑物的保温隔热。产品以板状、卷状或其他预制构件(平板、锥形、舌槽式、船形板、有型构件等)的形式进行制造。

Products covered by this standard are also used for sound insulation and in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.

本标准所涵盖的产品亦被应用于隔音领域，并用于预制式保温系统及复合面板中;但本标准并不涉及包含此类产品的系统的性能表现。

This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.

本标准描述了产品的特性，并包括测试、符合性评估、标识和标签的程序。

This standard does not specify the required class or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards.

本标准并未明确指定某项特定属性所应达到的所需类别或等级，以便产品能够证明其在特定应用场合中的适用性。特定应用所需的类别和等级信息应从相关法规或无冲突的标准中查找。

Products with a declared thermal resistance lower than 0,25 m2.KW or a declared thermal conductivity at 10°C greater than 0,060 W/(m-K) are not covered by this standard.

热阻声明值低于0,25m2-K/W或在10°C时热导率声明值大于0,060W/(m·K)的产品不在本标准范围内。

This standard does not cover in-situ insulation products (covered by FprEN 16025-1 and -2), products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14309),products intended to be used in civil engineering applications (covered by EN 14933) and products intendedto be used in beam and block systems in floors (covered by EN 15037-4).

本标准不涵盖现场绝缘产品(由FprEN16025-1和-2规范涵盖)、旨在用于建筑设备和工业设施绝缘的产品(由EN14309规范涵盖)、适用于土木工程应用领域的产品(由EN14933规范涵盖)以及用于楼板中梁和块体系统中的产品(由EN15037-4规范涵盖)。

工厂制膨胀聚乙烯(EPS)产品ce认证法规

工厂制膨胀聚乙烯(EPS)产品产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

工厂制膨胀聚乙烯(EPS)产品ce认证模式

有且仅有1个认证：模式 1，由欧盟公告机构进行测试和工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.