EN 14307:2009+A1:2013工厂制挤压泡沫聚苯乙烯(XPS)产品CE认证详解-上海郜盟

工厂制挤压泡沫聚苯乙烯(XPS)产品ce认证标准

EN 14307:2009+A1:2013

Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification

建筑设备和工业设施用隔热制品.工厂制挤压泡沫聚苯乙烯(XPS)产品.规范

This European Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately 180 °C to + 75 °C.

本欧洲标准规定了用于建筑设备与工业装置热绝缘的厂制挤塑聚苯乙烯泡沫制品的各项要求，这些装置的工作温度范围约为一180°C至+75°C。

Below an operating temperature of 50 °C, special tests regarding the suitability of the material in the intended application are advised (e.g. liquefaction of oxygen). Manufacturer's advice should be heeded in all cases.

在低于-50°C的操作温度下，建议针对该材料在预期应用中的适用性进行专门测试(例如氧气液化)。在任何情况下都应重视制造商的建议。

The products are manufactured in the form of faced or unfaced boards, pipe sections, segments and prefabricated ware.

产品以带面或无面板、管段、段和预制件的形式制造。

This European Standard describes product characteristics and includes procedures for testing,evaluation of conformity, marking and labelling.

本欧洲标准描述了产品的特性，并包括测试、符合性评估、标识和标签的程序。

Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered.

本标准涵盖的产品也用于预制保温系统和复合板;但不包括包含这些产品的系统的性能。

This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.

本欧洲标准并未具体规定某项特性所应达到的必备水平，该产品需通过满足这些水平来证明其适用于特定用途或具体应用场合。特定应用场合所需的各项水平可在相关法规及招标邀请文件中找到。

Products with a declared thermal conductivity greater than 0,060 W/(m-K) at a mean temperature of10 °C are not covered by this standard.

在10°C平均温度下，热导率声明值大于0,060W/(m·K)的产品不在本标准覆盖范围内。

This European Standard does not cover products intended to be used for the insulation of the building structure nor for acoustical insulation.

本欧洲标准不涵盖用于建筑结构保温或声学隔热的产品。

工厂制挤压泡沫聚苯乙烯(XPS)产品ce认证法规

工厂制挤压泡沫聚苯乙烯(XPS)产品产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

工厂制挤压泡沫聚苯乙烯(XPS)产品ce认证模式

有且仅有1个认证：模式 1，由欧盟公告机构进行测试和工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.