EAD 041094-00-1201: 2019用于建筑设备和工业安装的开放式工厂制造硬质聚氨酯泡沫(PUR)和聚异氰脲酸酯泡沫(PIR)产品CE认证/ETA认证详解-上海郜盟

b2a403568721380ca8862297020d86fd

用于建筑设备和工业安装的开放式工厂制造硬质聚氨酯泡沫(PUR)和聚异氰脲酸酯泡沫(PIR)产品ce认证标准-ETA认证

EAD 041094-00-1201: 2019

Open-cell factory-made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) productsfor building equipment and industrial installations

用于建筑设备和工业安装的开放式工厂制造硬质聚氨酯泡沫(PUR)和聚异氰脲酸酯泡沫(PIR)产品

This EAD covers open cell factory-made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR)products for building equipment and industrial installations (in the following referred to as rigid foam products). The products have a percentage of open cells of at least 90 %, and can be provided with or without facings..

上海郜盟提示本EAD涵盖用于建筑设备及工业装置的开放式细胞工厂制硬质聚氨酯泡沫(PUR)及聚异氰脲酸酯泡沫(PIR)产品(以下统称为硬质泡沫产品)。此类产品至少含有90%的开放式细胞结构，并可配备或不配备饰面层。

The products are produced by using high molecular weight blowing agents such as hydro fluorocarbons and hydrocarbons (e.g. pentanes) or carbon dioxide. The blowing agents can also be used mixed together.

这些产品是通过使用高分子量发泡剂(如氢氟碳化合物和烃类物质(如戊烷)或二氧化碳)来生产的。发泡剂也可被混合使用。

The products are manufactured in the form of pipe insulation shells (pipe sections).

该产品以管道保温壳(管段)的形式制造。

The product is not fully covered by the following harmonised technical specification: EN 143081.

该产品并未完全涵盖于以下统一技术规范EN143081中。

EN 14308 covers products with a closed cell content not less than 90 %, which means an open cell content less than 10%. In contrast to that, this EAD covers products with an open cell content of at least 90%. For closed cell products covered by EN 14308 the determination of the thermal conductivity after aging is required and a factor has to be determined as through gas exchange between cells and air by diffusion processes the thermal conductivity can worsen (depending on cell gas). In the case of open cell products,which are covered by this EAD, such an ageing procedure is not relevant, rather the thermal conductivity is measured after complete gas exchange between cells and air. For other relevant characteristics the test procedures do not differ. They are used in general for thermal insulation products

EN14308适用于闭孔含量不低于90%的产品，这意味着开孔含量低于10%。与此相对，本EAD适用于开孔含量至少达到90%的产品。对于EN14308所涵盖的闭孔产品而言，老化后热导率的测定是必要的，并且需确定一个因细胞与空气间通过扩散过程进行气体交换而导致热导率可能下降(取决于细胞内气体)的系数。对于本EAD所涵盖的开放式蜂窝状产品而言，此类老化程序并不适用。相反，应在蜂窝与空气之间完成完全气体交换后进行热导率测量。对于其他相关特性，测试流程并无差异。这些方法通常用于热绝缘制品的测试。

Since the EAD covers pipe insulation shells (pipe sections) only, the determination of flatness is not relevant. This EAD only covers products which meet the deviations from length, thickness, internal diameter,squareness and linearity given in EN 14308 (table 1, clause 4.2.2.2 and 4.2.2.4).

由于EAD仅涵盖管绝缘壳体(管段)部分，平整度的判定并不相关。本EAD仅适用于符合EN14308标准(表1、第4.2.2.2和4.2.2.4条)中关于长度、厚度、内径、正方形度和线性度偏差要求的产品。

Concerning product packaging transport, storage, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport.storage, maintenance, replacement and repair of the product as he considers necessary.

在产品包装、运输、储存、维护、更换和修理方面，制造商有责任采取适当的措施，并在其认为必要的情况下向客户提供有关产品运输、储存、维护、更换及修理方面的建议。

It is assumed that the product will be installed according to the manufacturer's instructions or (in absence of such instructions) according to the usual practice of the building professionals.

假设产品将按照制造商的说明进行安装，或(如无此类说明)按建筑专业人士的常规做法进行安装。

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document shall be considered for the determination of the performance and detailed in the ETA.

对于本欧洲评估文件所涵盖产品的性能判定，应考虑相关制造商的规定，这些规定会对产品性能产生影响，相关内容将在ETA中详细列出。

What is an EAD?什么是EAD？

A European Assessment Document, or EAD for short, is a harmonised technical specification developed by EOTA as the basis for European Technical Assessments (ETAs).上海郜盟提示欧洲评估文件（简称EAD）是由欧洲技术认证组织（EOTA）制定的统一技术规范，作为欧洲技术评估（ETA）的基础。

In combination with the ETA, the EAD provides manufacturers with a way to CE marking for construction products that are not or not fully covered by a harmonised European standard (hEN) under the Construction Products Regulation (EU) 305/2011. The CE marking allows the manufacturer to freely market his product in the entire European Economic Area as well as in Switzerland and Turkey.

结合ETA，EAD为制造商提供了一种对未被或未完全被《建筑产品法规》（EU）305/2011所涵盖的协调欧洲标准（hEN）覆盖的建筑产品进行CE标志认证的途径。获得CE标志后，制造商即可在全部欧洲经济区以及瑞士和土耳其自由销售其产品。

用于建筑设备和工业安装的开放式工厂制造硬质聚氨酯泡沫(PUR)和聚异氰脲酸酯泡沫(PIR)产品ce认证法规-ETA认证

用于建筑设备和工业安装的开放式工厂制造硬质聚氨酯泡沫(PUR)和聚异氰脲酸酯泡沫(PIR)产品产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

用于建筑设备和工业安装的开放式工厂制造硬质聚氨酯泡沫(PUR)和聚异氰脲酸酯泡沫(PIR)产品ce认证模式

TAB机构测试+ETA认证，由欧盟公告机构进行工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
制造商职责：	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
Notified Body 公告机构职责：	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.
Technical Assessment Bodies (TABs) TAB机构职责	European Technical Assessments (ETAs) are issued by Technical Assessment Bodies (TABs) designated for the relevant product area by the EU Member and Partner States in accordance with the Construction Products Regulation (EU) No 305/2011.欧洲技术评估（eta）由欧盟成员国和伙伴国根据建筑产品法规（EU） No 305/2011为相关产品领域指定的技术评估机构（TABs）发布。