EAD 041125-00-1201: 2019用于无额外承重结构的地面构造中的植物纤维制成的现场散装隔热或隔音产品CE认证/ETA认证详解-上海郜盟

b2a403568721380ca8862297020d86fd

用于无额外承重结构的地面构造中的植物纤维制成的现场散装隔热或隔音产品ce认证标准-ETA认证

EAD 041125-00-1201: 2019

IN-SITU LOOSE FILL THERMAL AND/OR ACOUSTIC INSULATING PRODUCTS MADE OF VEGETABLE FIBRES TO BE USED IN FLOOR CONSTRUCTIONS WITHOUT ADDITIONAL LOAD-BEARING STRUCTURES

用于无额外承重结构的地面构造中的植物纤维制成的现场散装隔热或隔音产品

The in-situ loose-fill thermal and/or acoustic insulating product made of vegetable fibres to be used in floor constructions without additional load-bearing structures is an insulation product consisting of vegetable fibres with or without a binding agent, supplied as loose fill insulation for manual or mechanical installation in floor constructions, hereinafter referred to as "insulating product".

上海郜盟提示现场使用的松散填充式热和/或声绝缘产品，由植物纤维制成，适用于无需额外承重结构的地面构造中。该产品由含有或不含有粘结剂的植物纤维构成，以松散填充形式供应，用于手动或机械方式安装于地面构造中，以下统称为“绝缘产品”。

The insulating product is placed between the bearing structure and the (dry) screed of the floor and contributes to the distribution of the load that the floor has to support.

该隔热产品放置在承重结构与(干)找平层之间，有助于分担地板所承受的荷载。

The vegetable fibres consist for example of hemp shives or fibres, recycled and/or pelletized paper or untreated chipped wood. The type(s) of vegetable fibres are to be stated in the ETA. The nature and the amount of the binding agent and additives are to be stated in the ETA.

这些植物纤维包括例如麻秆或纤维、回收并/或制粒的纸张以及未经处理的碎木等。植物纤维的类型应在ETA中予以说明。粘合剂及添加剂的性质和用量也应在ETA中予以说明。

The insulating product may be treated with a flame retardant.

该隔热产品可经阻燃剂处理。

The ETA will be issued for the product on the basis of agreed data/information, deposited with the Technical Assessment Body, which identifies the product that has been assessed.

ETA将根据提交给技术评估机构的已确认数据/信息，为该产品签发，该信息用于识别被评估的产品。

The product is not covered by a harmonised European standard (hEN).

该产品不受统一欧洲标准(hEN)的覆盖。

Concerning product packaging, transport, storage, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.

在产品包装、运输、储存、维护、更换和修理方面，制造商有责任采取相应措施，并在其认为必要的情况下向客户提供有关产品运输、储存、维护、更换及修理方面的建议。

It is assumed that the product will be installed according to the manufacturer's instructions or (in absence of such instructions) according to the usual practice of the building professionals.

假设产品将按照制造商的说明进行安装，或(在没有此类说明的情况下)按照建筑专业人士的常规做法进行安装。

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document shall be considered for the determination of the performance and detailed in the ETA.

对于本欧洲评估文件所涵盖产品的性能判定，应考虑相关制造商的规定，这些规定会对产品性能产生影响，相关内容将在ETA中详细阐述。

What is an EAD?什么是EAD？

A European Assessment Document, or EAD for short, is a harmonised technical specification developed by EOTA as the basis for European Technical Assessments (ETAs).上海郜盟提示欧洲评估文件（简称EAD）是由欧洲技术认证组织（EOTA）制定的统一技术规范，作为欧洲技术评估（ETA）的基础。

In combination with the ETA, the EAD provides manufacturers with a way to CE marking for construction products that are not or not fully covered by a harmonised European standard (hEN) under the Construction Products Regulation (EU) 305/2011. The CE marking allows the manufacturer to freely market his product in the entire European Economic Area as well as in Switzerland and Turkey.

结合ETA，EAD为制造商提供了一种对未被或未完全被《建筑产品法规》（EU）305/2011所涵盖的协调欧洲标准（hEN）覆盖的建筑产品进行CE标志认证的途径。获得CE标志后，制造商即可在全部欧洲经济区以及瑞士和土耳其自由销售其产品。

用于无额外承重结构的地面构造中的植物纤维制成的现场散装隔热或隔音产品ce认证法规-ETA认证

用于无额外承重结构的地面构造中的植物纤维制成的现场散装隔热或隔音产品产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

用于无额外承重结构的地面构造中的植物纤维制成的现场散装隔热或隔音产品ce认证模式

TAB机构测试+ETA认证，由欧盟公告机构进行工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
制造商职责：	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
Notified Body 公告机构职责：	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.
Technical Assessment Bodies (TABs) TAB机构职责	European Technical Assessments (ETAs) are issued by Technical Assessment Bodies (TABs) designated for the relevant product area by the EU Member and Partner States in accordance with the Construction Products Regulation (EU) No 305/2011.欧洲技术评估（eta）由欧盟成员国和伙伴国根据建筑产品法规（EU） No 305/2011为相关产品领域指定的技术评估机构（TABs）发布。