EAD 041559-00-1201: 2020隔热与吸音抹灰/石膏板施工CE认证/ETA认证详解-上海郜盟

b2a403568721380ca8862297020d86fd

隔热与吸音抹灰/石膏板施工ce认证标准-ETA认证

EAD 041559-00-1201: 2020

THERMAL INSULATION AND SOUND ABSORBING RENDERING/PLASTERING

隔热与吸音抹灰/石膏板施工

This European Assessment Document applies to factory-made thermal insulation and sound absorbing rendering/plastering mortar based on inorganic binders and aggregates for external and internal use on walls and ceilings.

上海郜盟提示本欧洲评估文件适用于工厂生产的热绝缘材料及基于无机粘合剂和集料制成的吸音饰面/抹灰砂浆，适用于墙体和天花板的内外使用。

The product can include additional admixtures as aerogel, hydrophobic agents and pore forming material.

该产品可包含气凝胶、疏水剂和孔隙形成材料等附加外加剂。

The rendering/plastering can be applied manually or by fettling machines.

抹灰/石膏可手工施工或使用抹灰机进行。

The product is not covered by a harmonised European standard (hEN).

该产品不受统一欧洲标准(hEN)的覆盖。

Note:

Although EN 998-1 also covers rendering and plastering mortars, the high-performance insulating plasters with sound absorption properties according to this EAD are not comparable with the products covered by EN 998-1:

-The insulating properties of high-performance insulating plasters are not adequately covered by EN 998-1, as assessment methods contained in the harmonised standard are not relevant for the peculianities of the product covered by this EAD. The assessment methods concerning thermal conductivity according to EN 998-1 are not sufficient for the low thermal conductivities (e.g.. 0.028 W/m K) of the products covered by this EAD which are often based on aerogel and can be affected by ageing. In contrast to EN 998-1, the EAD allows a proper assessment of the product performances concerned.

-EN 998-1 does not include sound absorption.

-EN 998-1 does not include hygroscopic sorption properties.

-Compressive strength is not included in EN 998-1, Annex ZA.

注:

尽管EN998-1也涵盖了灰浆和抹灰砂浆，但根据此EAD标准所定义的高性能保温抹灰料具有吸音特性，而这些产品与EN998-1所涵盖的产品并不具有可比性:

-高性能绝缘膏的绝缘特性并未被EN 998-1充分涵盖，因为该协调标准中所包含的评估方法并不适用于本EAD所涉及产品的特性。根据EN998-1对热导率进行的评估方法对于本EAD所涉及产品(其热导率通常较低，例如0.028W/m-K)的低热导特性而言并不充分，因为这些产品往往基于气凝胶制成，且可能受到老化因素的影响。与EN998-1不同，本EAD允许对所涉产品性能进行恰当的评估。

-EN998-1不包括吸音性能。

-EN998-1不包含吸湿性能。

-抗压强度未包含在EN998-1附录ZA中。

Concering product packaging, transport, storage, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.

关于产品的包装、运输、储存、维护、更换和修理事宜，制造商有责任采取相应措施，并在其认为必要的情况下向客户提供有关产品运输、储存、维护、更换及修理方面的建议。

It is assumed that the product will be installed according to the manufacturer's instructions or (in absence of such instructions) according to the usual practice of the building professionals.

假设产品将按照制造商的说明进行安装，或(若无此类说明)根据建筑专业人士通常的做法进行安装。

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document shall be considered for the determination of the performance and detailed in the ETA

对于本欧洲评估文件所涵盖产品的性能判定，应考虑相关制造商的规定，这些规定会对产品性能产生影响，相关内容将在ETA中详细列出。

What is an EAD?什么是EAD？

A European Assessment Document, or EAD for short, is a harmonised technical specification developed by EOTA as the basis for European Technical Assessments (ETAs).上海郜盟提示欧洲评估文件（简称EAD）是由欧洲技术认证组织（EOTA）制定的统一技术规范，作为欧洲技术评估（ETA）的基础。

In combination with the ETA, the EAD provides manufacturers with a way to CE marking for construction products that are not or not fully covered by a harmonised European standard (hEN) under the Construction Products Regulation (EU) 305/2011. The CE marking allows the manufacturer to freely market his product in the entire European Economic Area as well as in Switzerland and Turkey.

结合ETA，EAD为制造商提供了一种对未被或未完全被《建筑产品法规》（EU）305/2011所涵盖的协调欧洲标准（hEN）覆盖的建筑产品进行CE标志认证的途径。获得CE标志后，制造商即可在全部欧洲经济区以及瑞士和土耳其自由销售其产品。

隔热与吸音抹灰/石膏板施工ce认证法规-ETA认证

隔热与吸音抹灰/石膏板施工产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

隔热与吸音抹灰/石膏板施工ce认证模式

TAB机构测试+ETA认证，由欧盟公告机构进行工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
制造商职责：	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
Notified Body 公告机构职责：	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.
Technical Assessment Bodies (TABs) TAB机构职责	European Technical Assessments (ETAs) are issued by Technical Assessment Bodies (TABs) designated for the relevant product area by the EU Member and Partner States in accordance with the Construction Products Regulation (EU) No 305/2011.欧洲技术评估（eta）由欧盟成员国和伙伴国根据建筑产品法规（EU） No 305/2011为相关产品领域指定的技术评估机构（TABs）发布。