EAD 041561-00-1201: 2020由矿物基泡沫制成的现场成型热绝缘材料CE认证/ETA认证详解-上海郜盟

b2a403568721380ca8862297020d86fd

由矿物基泡沫制成的现场成型热绝缘材料ce认证标准-ETA认证

EAD 041561-00-1201: 2020

IN-SITU FORMED THERMAL INSULATION MADE OF MINERAL-BASED FOAM

由矿物基泡沫制成的现场成型热绝缘材料

The construction product is an in-situ formed thermal insulation made of mineral-based foam.

上海郜盟提示该建筑产品是一种由矿物基泡沫制成的现场成型保温隔热材料。

The in-situ formed thermal insulation made of mineral-based foam (in the following referred to as thermal insulation) is made from several aqueous components (surfactant and additives / inorganic filler, organic binder and additives / curing agent) and pressurized air. The different components are mixed on site. The construction product does not contain fibres.

就地生成的由矿物基泡沫材料制成的热绝缘材料(以下统称为热绝缘材料)由多种水基成分(表面活性剂与添加剂/无机填料、有机黏合剂与添加剂/固化剂)及加压空气构成。这些不同成分在现场进行混合。该建筑制品不含纤维。

The product is not covered by a harmonised European standard (hEN)

该产品未被统一的欧洲标准(hEN)覆盖。

Concering product packaging, transport, storage, maintenance, replacement and repair, it is the responsibility of the manutacturer to undertake the appropriate measures and to advise his clients on the transport, storage. maintenance, replacement and repair of the product as he considers necessary.

关于产品的包装、运输、储存、维护、更换和修理事宜，制造商有责任采取相应措施，并在其认为必要的情况下向客户提供有关产品运输、储存、维护、更换及修理方面的建议。

It is assumed that the product will be installed according to the manufacturer's instructions or (in absence of such instructions) according to the usual practice of the building professionals.

假设该产品将按照制造商的说明进行安装，或(若无此类说明)根据建筑专业人士通常的做法进行安装。

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document shall be considered for the determination of the performance and detailed in the ETA.

对于本欧洲评估文件所涵盖产品的性能判定，应考虑相关制造商的规定，这些规定会对产品性能产生影响，相关内容将在ETA中予以详细阐述。

What is an EAD?什么是EAD？

A European Assessment Document, or EAD for short, is a harmonised technical specification developed by EOTA as the basis for European Technical Assessments (ETAs).上海郜盟提示欧洲评估文件（简称EAD）是由欧洲技术认证组织（EOTA）制定的统一技术规范，作为欧洲技术评估（ETA）的基础。

In combination with the ETA, the EAD provides manufacturers with a way to CE marking for construction products that are not or not fully covered by a harmonised European standard (hEN) under the Construction Products Regulation (EU) 305/2011. The CE marking allows the manufacturer to freely market his product in the entire European Economic Area as well as in Switzerland and Turkey.

结合ETA，EAD为制造商提供了一种对未被或未完全被《建筑产品法规》（EU）305/2011所涵盖的协调欧洲标准（hEN）覆盖的建筑产品进行CE标志认证的途径。获得CE标志后，制造商即可在全部欧洲经济区以及瑞士和土耳其自由销售其产品。

由矿物基泡沫制成的现场成型热绝缘材料ce认证法规-ETA认证

由矿物基泡沫制成的现场成型热绝缘材料产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

由矿物基泡沫制成的现场成型热绝缘材料ce认证模式

TAB机构测试+ETA认证，由欧盟公告机构进行工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
制造商职责：	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
Notified Body 公告机构职责：	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.
Technical Assessment Bodies (TABs) TAB机构职责	European Technical Assessments (ETAs) are issued by Technical Assessment Bodies (TABs) designated for the relevant product area by the EU Member and Partner States in accordance with the Construction Products Regulation (EU) No 305/2011.欧洲技术评估（eta）由欧盟成员国和伙伴国根据建筑产品法规（EU） No 305/2011为相关产品领域指定的技术评估机构（TABs）发布。