EAD 230064-00-0106: 2018道路标线-反射元件CE认证/ETA认证详解-上海郜盟

b2a403568721380ca8862297020d86fd

道路标线-反射元件ce认证标准-ETA认证

EAD 230064-00-0106: 2018

Road markings -retro-reflective elements

道路标线-反射元件

3cee2291-626d-44a6-a91e-daee626d61c7

This EAD specifies assessment methods for retro-reflective elements (further called RRE).

上海郜盟提示本EAD规定了逆反射元件（以下简称RRE）的评估方法。

RRE take the form of a fine powder to be applied onto a paint-based road marking. RRE are composed of a layer of small glass-ceramic spherical beads build around a core of clustered glass beads.

RRE呈细粉状，可涂覆于漆基道路标线之上。RRE由一层小型玻璃陶瓷球形珠粒构成，这些珠粒围绕着一团簇的玻璃珠核心形成。

A resin is used to build the core and adhere the outer layer of the high refractive index beads.

使用树脂来构建核心并粘合高折射率珠粒的外层。

This resin will also serve as the reflective miror. Where traditional glass beads have a refractive index (RI)range from 1,5 to 1,7, the refractive index of the exterior glass-ceramic beads used for these products will range from 1,9 to 2,4.

这种树脂还将充当反射镜。传统玻璃珠的折射率(RI)范围在1.5至1.7之间，而用于这些产品的外部玻璃陶瓷珠的折射率范围则在1.9至2.4之间。

The refractive index can only be measured before the beads are processed into an RRE. The refractive index of exterior beads will determine if the element provides retro-reflective performance in dry or wet weather conditions.

折射率只能在珠子被加工成RRE之前进行测量。外部珠子的折射率将决定该元件在干燥或潮湿天气条件下是否具备逆反射性能。

RRE with glass-ceramic beads RI 1,9. provide retro-reflection of the light during dry weather conditions, or shortly after rainfall, and RRE with glass-ceramic beads RI 2.4. provide retro-reflection of the light during continuous rain conditions, or when the road marking is fully covered with water.

带有微晶玻璃珠的RRE(RI1,9)可在干燥天气条件或降雨后不久提供光的逆反射;带有微晶玻璃珠的RRE(RI2,4)可在持续降雨条件或道路标线完全被水覆盖时提供光的逆反射。

Due to the size of the RRE, many of the small beads will retro-reflect the light in a very efficient way. The choice of RI1,9 beads provides high light return in dry conditions, while RRE with RI 2,4 beads compensate for deviation caused by the water layer and send the light back in the right direction as well.

由于RRE的尺寸，许多小珠将以非常高效的方式逆向反射光线。选择RI为1.9的珠子在干燥条件下能提供高光返回率，而RI为2.4的珠子则能补偿由水层引起的偏差，并将光线以正确的方向反射回去。

The product is not covered by a harmonised European standard (hEN).

该产品未被统一的欧洲标准(hEN)覆盖。

Concerning product packaging. transport, storage, installation, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, installation, maintenance, replacement and repair of the product as he considers necessary.

关于产品的包装、运输、储存、安装、维护、更换和维修，制造商有责任采取适当措施，并根据其认为必要的情况，就产品的运输、储存、安装、维护、更换和维修向客户提供建议

It is assumed that the product will be installed according to the manufacturer's instructions or (in absence of such instructions) according to the usual practice of the building professionals.

假设产品将按照制造商的说明进行安装，或(若无此类说明)根据建筑专业人士通常的做法进行安装。

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document shall be considered for the determination of the performance and detailed in the ETA.

相关制造商的规定对本欧洲评估文件所涵盖产品的性能具有影响，应在确定性能时予以考虑，并在ETA中详细说明。

What is an EAD?什么是EAD？

A European Assessment Document, or EAD for short, is a harmonised technical specification developed by EOTA as the basis for European Technical Assessments (ETAs).上海郜盟提示欧洲评估文件（简称EAD）是由欧洲技术认证组织（EOTA）制定的统一技术规范，作为欧洲技术评估（ETA）的基础。

In combination with the ETA, the EAD provides manufacturers with a way to CE marking for construction products that are not or not fully covered by a harmonised European standard (hEN) under the Construction Products Regulation (EU) 305/2011. The CE marking allows the manufacturer to freely market his product in the entire European Economic Area as well as in Switzerland and Turkey.

结合ETA，EAD为制造商提供了一种对未被或未完全被《建筑产品法规》（EU）305/2011所涵盖的协调欧洲标准（hEN）覆盖的建筑产品进行CE标志认证的途径。获得CE标志后，制造商即可在全部欧洲经济区以及瑞士和土耳其自由销售其产品。

Finished floor or ceiling covering as well as possible sound reducing materials are not part of the kit.

完成的地板或天花板覆盖物以及可能的隔音材料不属于套件的一部分。

This EAD is not applicable when

-timber treatments (preservatives, fire and flame retardants) are used, and/or

-recycled material is used.

此 EAD 在下列情况下不适用:

-木材处理工艺（防腐剂、防火阻燃剂）被应用于其中，且/或

-使用了回收材料。

Concerning product packaging, transport, storage, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.

关于产品的包装、运输、储存、维护、更换和修理事宜，制造商有责任采取相应措施，并在其认为必要的情况下向客户提供有关产品运输、储存、维护、更换及修理方面的建议。

It is assumed that the product will be installed according to the manufacturer's product installation instructions (MPl) or (in absence of such instructions) according to the usual practice of the building professionals

假定该产品将按照制造商的产品安装说明（MPl）进行安装，或者在无此类说明的情况下，则按照建筑专业人员的惯常做法进行安装

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document, shall be considered for the determination of the performance and detailed in the ETA.

对于本欧洲评估文件所涵盖产品的性能判定，应考虑相关制造商的规定，这些规定会对产品性能产生影响，相关内容将在 ETA 中予以详细阐述。

道路标线-反射元件ce认证法规-ETA认证

道路标线-反射元件产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

道路标线-反射元件ce认证模式

TAB机构测试+ETA认证，由欧盟公告机构进行工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
制造商职责：	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
Notified Body 公告机构职责：	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.
Technical Assessment Bodies (TABs) TAB机构职责	European Technical Assessments (ETAs) are issued by Technical Assessment Bodies (TABs) designated for the relevant product area by the EU Member and Partner States in accordance with the Construction Products Regulation (EU) No 305/2011.欧洲技术评估（eta）由欧盟成员国和伙伴国根据建筑产品法规（EU） No 305/2011为相关产品领域指定的技术评估机构（TABs）发布。