EAD 230172-00-0102: 2021用于道路施工中水力粘结层的聚合物添加剂CE认证/ETA认证详解-上海郜盟

用于道路施工中水力粘结层的聚合物添加剂ce认证标准-ETA认证

EAD 230172-00-0102: 2021 Polymeric additives for hydraulically bound layers in road construction 用于道路施工中水力粘结层的聚合物添加剂

This EAD covers polymeric additives for hydraulically bound layers in road construction (hereinafter referred to as "polymer additive(s)").

上海郜盟提示本EAD涵盖用于道路施工中水硬性层的聚合物添加剂(以下简称“聚合物添加剂”)。

Polymer additives are copolymer dispersion-based silica-polymer hybrids used to prepare cement-bound base courses in road and pavement construction.

聚合物添加剂是基于共聚物分散体的二氧化硅-聚合物混合物，用于制备道路和路面施工中的水泥结合基层。

The product can be supplied as powder or dispersion.

该产品可提供粉末或分散液形式。

This EAD provides assessment methods to evaluate the performance of cement-bound mixtures with polymer additives (hereinafter referred to as "cement-bound mixture") in comparison to cement-bound mixtures without polymer additives (hereinafter referred to as "cement-bound reference mixture"

本EAD提供了评估方法，用于评价掺有聚合物添加剂的水泥结合混合料(以下简称“水泥结合混合料”)的性能，并与未掺加聚合物添加剂的水泥结合混合料(以下简称“水泥结合参照混合料”)进行比较。

The composition of the cement-bound mixture and the cement-bound reference mixture shall be stated in the ETA with a precision of 0,1 M.-%.

水泥结合混合料和水泥结合参考混合料的组成应在ETA中以0.1M.%的精度说明。

The product is not covered by a harmonised European standard (hEN).

该产品未被统一的欧洲标准(hEN)覆盖。

The related EAD 260o06-00-0301 covers polymeric concrete additions commonly used for engineering structures in combination with reinforced concrete as demonstrated in the essential characteristic"Corrosion behaviour". Additionally, the essential characteristics "Homogeneity", "Colour", "Analysis of dry residue (infrared analysis), "Analysis of dry residue (thermogravimetric analysis)", "Absolute density'","Conventional dry material content", "Dynamic viscosity', "pH value", "Total chlorine", "Water soluble chloride", "Seting time", "Soundness" and "Air content of fresh concrete" do not describe essential characteristics relevant for the work requirements as set out in the provisions of Regulation (EU) 305/2011 but rather inherent product characteristics. The essential characteristics "Compressive strength of mortar","Compressive strength of concrete" and "Tensile splitting strength" are covered in this EAD with reference to test standards specifically related to hydraulic mixtures. The product is therefore not covered by EAD260006-00-0301.

相关的EAD 260006-00-0301涵盖通常与钢筋混凝土结合用于工程结构的聚合物混凝土添加剂，如基本特性“腐蚀行为”所示。此外，基本特性“均匀性”、“颜色”、“干残留物分析（红外分析）”、“干残留物分析（热重分析）”、“绝对密度”、“常规干料含量”、“动态粘度”、“pH值”、“总氯”、“水溶性氯化物”、“凝结时间”、“耐久性”和“新拌混凝土含气量”并未描述法规（EU） 305/2011条款中规定的工作要求相关的基本特性，而是固有产品特性。基本特性“砂浆抗压强度”、“混凝土抗压强度”和“拉伸劈裂强度”在本EAD中涉及，并参考与水性混合物相关的测试标准。因此，该产品不受EAD260006-00-0301的涵盖。

Concerning product packaging, transport, storage, maintenance, replacement and repair it is the

responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.

关于产品的包装、运输、储存、维护、更换和维修，制造商有责任采取适当措施，并视需要就产品的运输、储存、维护、更换和维修向客户提出建议。

It is assumed that the product will be installed according to the manufacturer's instructions or (in absence of such instructions) according to the usual practice of the building professionals.

假设该产品将按照制造商的说明进行安装，或(如无此类说明)按照建筑专业人士通常的做法进行安装。

Relevant manufacturer's stipulations, e.g., with regard to the intended end use conditions, having influence on the performance of the product covered by this European Assessment Document shall be considered for the determination of the performance and detailed in the ETA as long as the details of the assessment methods as laid down in this EAD are respected.

相关制造商的规定，例如关于预期最终使用条件的规定，只要遵守本欧洲评估文件(EAD）中规定的评估方法细节，即应予以考虑，用于确定本欧洲评估文件所涵盖产品的性能，并在ETA中详细说明。

 

What is an EAD?什么是EAD？

A European Assessment Document, or EAD for short, is a harmonised technical specification developed by EOTA as the basis for European Technical Assessments (ETAs).上海郜盟提示欧洲评估文件（简称EAD）是由欧洲技术认证组织（EOTA）制定的统一技术规范，作为欧洲技术评估（ETA）的基础。

In combination with the ETA, the EAD provides manufacturers with a way to CE marking for construction products that are not or not fully covered by a harmonised European standard (hEN) under the Construction Products Regulation (EU) 305/2011. The CE marking allows the manufacturer to freely market his product in the entire European Economic Area as well as in Switzerland and Turkey.

结合ETA，EAD为制造商提供了一种对未被或未完全被《建筑产品法规》（EU）305/2011所涵盖的协调欧洲标准（hEN）覆盖的建筑产品进行CE标志认证的途径。获得CE标志后，制造商即可在全部欧洲经济区以及瑞士和土耳其自由销售其产品。

Finished floor or ceiling covering as well as possible sound reducing materials are not part of the kit.

完成的地板或天花板覆盖物以及可能的隔音材料不属于套件的一部分。

This EAD is not applicable when

-timber treatments (preservatives, fire and flame retardants) are used, and/or

-recycled material is used.

此 EAD 在下列情况下不适用:

-木材处理工艺（防腐剂、防火阻燃剂）被应用于其中，且/或

-使用了回收材料。

Concerning product packaging, transport, storage, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.

关于产品的包装、运输、储存、维护、更换和修理事宜，制造商有责任采取相应措施，并在其认为必要的情况下向客户提供有关产品运输、储存、维护、更换及修理方面的建议。

It is assumed that the product will be installed according to the manufacturer's product installation instructions (MPl) or (in absence of such instructions) according to the usual practice of the building professionals

假定该产品将按照制造商的产品安装说明（MPl）进行安装，或者在无此类说明的情况下，则按照建筑专业人员的惯常做法进行安装

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document, shall be considered for the determination of the performance and detailed in the ETA.

对于本欧洲评估文件所涵盖产品的性能判定，应考虑相关制造商的规定，这些规定会对产品性能产生影响，相关内容将在 ETA 中予以详细阐述。

 

用于道路施工中水力粘结层的聚合物添加剂ce认证法规-ETA认证

用于道路施工中水力粘结层的聚合物添加剂产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

 

用于道路施工中水力粘结层的聚合物添加剂ce认证模式

TAB机构测试+ETA认证， 由欧盟公告机构进行工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.
Technical Assessment Bodies (TABs) TAB机构职责	European Technical Assessments (ETAs) are issued by Technical Assessment Bodies (TABs) designated for the relevant product area by the EU Member and Partner States in accordance with the Construction Products Regulation (EU) No 305/2011.欧洲技术评估（eta）由欧盟成员国和伙伴国根据建筑产品法规（EU） No 305/2011为相关产品领域指定的技术评估机构（TABs）发布。

 

 

 

用于道路施工中水力粘结层的聚合物添加剂ce认证测试哪些项目

 

 

 

 

 

 

 

EAD认证流程

 

 

 

用于道路施工中水力粘结层的聚合物添加剂ce认证机构

公告号机构NB1922,拥有欧盟全品类建材产品授权，上海郜盟拥有该机构直接授权，上海办公室审核员可直接代表机构进行工厂审核，大大减少工厂的差旅成本和时间成本

NB1922欧盟官网资质：

 

上海郜盟，专业CE认证服务，丰富的行业经验以及专业的工程师可帮助中国工厂快速通过合规评定，取得CE证书！！

 

---

 

 

【行动号召】

·       如果您正在面临CE、UKCA等认证难题，欢迎联系上海郜盟获取免费预评估！

·       关注我们，获取更多成功案例与行业合规指南。

 

---

 

 

📞 咨询热线：021-34122669 021-34126062  

📩 **扫码获取免费CE认证评估方案**