EAD 260002-00-0301: 2016用于混凝土的含二氧化锆的耐碱玻璃纤维CE认证/ETA认证详解-上海郜盟

b2a403568721380ca8862297020d86fd

用于混凝土的含二氧化锆的耐碱玻璃纤维ce认证标准-ETA认证

EAD 260002-00-0301: 2016

ALKALI RESISTANT GLASS FIBRES CONTAINING ZIRCONIUM DIOXIDE FOR THE USE IN CONCRETE

用于混凝土的含二氧化锆的耐碱玻璃纤维

The "alkali resistant glass fibres" ("AR glass fibres") are made of glass containing zirconium dioxide to achieve a high alkali resistance. The fibres are produced as roving or are chopped strands. The glass fibres have a particular sizing. The strand-in-cement-strength (SIC strength) of the "alkali resistant glass fibres"is greater than 250 N/mm2. The zirconium dioxide content (ZrO2) shall be at least 16 % (> 16 %). The AR glass fibres are manufactured from specified constituents in a production plant.

上海郜盟提示“耐碱玻璃纤维”（“AR玻璃纤维”）由含二氧化锆的玻璃制成，以实现高耐碱性。这些纤维以粗纱或切短丝的形式生产。该玻璃纤维具有特殊的浸渍处理。“耐碱玻璃纤维”的“水泥中纤维强度”（SIC强度）大于250 N/mm²。二氧化锆含量（ZrO₂）应至少为16%（>16%）。AR玻璃纤维在工厂中使用规定的成分制造而成。

For each case of application assessment tests shall be carried out with the intended concrete composition and the intended addition to demonstrate that the concrete may be processed reliably with the intended consistency provided under the conditions of the site and that the required properties are achieved.

对于每种情况，均应使用预期的混凝土组成和预期添加物进行应用评估试验，以证明在场地条件下，该混凝土能够以预期的稠度可靠地加工，并能达到所需的性能。

The product is not covered by a harmonised European standard.

该产品不受统一欧洲标准的覆盖。

Concerning product packaging, transport, storage, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.

关于产品的包装、运输、储存、维护、更换和维修，制造商有责任采取适当措施，并视需要就产品的运输、储存、维护、更换和维修向客户提出建议。

It is assumed that the product shall be installed according to the manufacturer's instructions or (in absence of such instructions) according to the usual practice of the building professionals.

假设产品应按照制造商的说明进行安装，或(在没有此类说明的情况下)按照建筑专业人士的常规做法。

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document shall be considered for the determination of the performance and detailed in the ETA.

相关制造商的规定对本欧洲评估文件所涵盖产品的性能具有影响，应在确定性能时予以考虑，并在ETA中详细说明。

What is an EAD?什么是EAD？

A European Assessment Document, or EAD for short, is a harmonised technical specification developed by EOTA as the basis for European Technical Assessments (ETAs).上海郜盟提示欧洲评估文件（简称EAD）是由欧洲技术认证组织（EOTA）制定的统一技术规范，作为欧洲技术评估（ETA）的基础。

In combination with the ETA, the EAD provides manufacturers with a way to CE marking for construction products that are not or not fully covered by a harmonised European standard (hEN) under the Construction Products Regulation (EU) 305/2011. The CE marking allows the manufacturer to freely market his product in the entire European Economic Area as well as in Switzerland and Turkey.

结合ETA，EAD为制造商提供了一种对未被或未完全被《建筑产品法规》（EU）305/2011所涵盖的协调欧洲标准（hEN）覆盖的建筑产品进行CE标志认证的途径。获得CE标志后，制造商即可在全部欧洲经济区以及瑞士和土耳其自由销售其产品。

Finished floor or ceiling covering as well as possible sound reducing materials are not part of the kit.

完成的地板或天花板覆盖物以及可能的隔音材料不属于套件的一部分。

This EAD is not applicable when

-timber treatments (preservatives, fire and flame retardants) are used, and/or

-recycled material is used.

此 EAD 在下列情况下不适用:

-木材处理工艺（防腐剂、防火阻燃剂）被应用于其中，且/或

-使用了回收材料。

关于产品的包装、运输、储存、维护、更换和修理事宜，制造商有责任采取相应措施，并在其认为必要的情况下向客户提供有关产品运输、储存、维护、更换及修理方面的建议。

It is assumed that the product will be installed according to the manufacturer's product installation instructions (MPl) or (in absence of such instructions) according to the usual practice of the building professionals

假定该产品将按照制造商的产品安装说明（MPl）进行安装，或者在无此类说明的情况下，则按照建筑专业人员的惯常做法进行安装

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document, shall be considered for the determination of the performance and detailed in the ETA.

对于本欧洲评估文件所涵盖产品的性能判定，应考虑相关制造商的规定，这些规定会对产品性能产生影响，相关内容将在 ETA 中予以详细阐述。

用于混凝土的含二氧化锆的耐碱玻璃纤维ce认证法规-ETA认证

用于混凝土的含二氧化锆的耐碱玻璃纤维产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

用于混凝土的含二氧化锆的耐碱玻璃纤维ce认证模式

TAB机构测试+ETA认证，由欧盟公告机构进行工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
制造商职责：	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
Notified Body 公告机构职责：	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.
Technical Assessment Bodies (TABs) TAB机构职责	European Technical Assessments (ETAs) are issued by Technical Assessment Bodies (TABs) designated for the relevant product area by the EU Member and Partner States in accordance with the Construction Products Regulation (EU) No 305/2011.欧洲技术评估（eta）由欧盟成员国和伙伴国根据建筑产品法规（EU） No 305/2011为相关产品领域指定的技术评估机构（TABs）发布。