넳 넲

EAD 330499-02-0601-v01: 2024用于混凝土的粘结紧固件和粘结膨胀紧固件CE认证/ETA认证详解-上海郜盟

b2a403568721380ca8862297020d86fd

用于混凝土的粘结紧固件和粘结膨胀紧固件ce认证标准-ETA认证

EAD 330499-02-0601-v01: 2024

Variant: Bonded fasteners and bonded expansion fasteners for use in concrete -Alternative drilling methods, seismic and fire resistance in steel fibre reinforced concrete, variable working life and time-to-failure assessment

变体:用于混凝土的粘结紧固件和粘结膨胀紧固件一一替代钻孔方法、钢纤维增强混凝土的抗震与耐火性能、可变工作寿命及失效时间评估

 

EAD 330499-02-0601 [1], clause 1.1 applies.

上海郜盟提示EAD330499-02-0601[1],第1.1条款适用。

This EAD is a variant to EAD 330499-02-0601 [1] due to:

-Alternative drilling methods,

-Bonded fasteners and bonded expansion fasteners for use in steel fibre reinforced concrete (SFRC) under seismic action and under fire exposure,

-Reduced working life of zinc-based coated fasteners.

- Integration of an additional assessment method for a more realistic assessment of long-term bond resistance for bonded fasteners (factor ysus) based on time to failure tests.

本EAD是EAD330499-02-0601[1]的变体,原因如下:

-替代钻孔方法,

-用于钢纤维增强混凝土(SFRC)在地震作用和火灾暴露下的粘结紧固件及膨胀型粘结紧固件,

-锌基涂层紧固件的工作寿命缩短。

-集成一种额外的评估方法,用于基于失效时间测试对粘接紧固件长期粘结强度(因子yosus)进行更真实的评估。

Drilling-methods

1. Rotary hammer (electric drilling machine or driven by compressed air):

-Hammer drilling with standard drill bit and subsequent cleaning (cleaning procedure as defined by the manufacturer in the MPIl)

-Hollow drilling (rotary hammer drilling using a hollow drill bit) with continuous vacuuming of the drilling dust with or without subsequent cleaning (cleaning procedure as defined by the manufacturer in the MPII)

钻井方法

1. 旋转锤(电动钻或气动钻):

- 使用标准钻头进行锤钻作业,随后进行清洁(清洁程序按制造商在 MPIl 中规定的执行)

- 空心钻探(使用空心钻头进行旋转锤钻),并持续抽吸钻屑,随后是否进行清洁(清洁程序按制造商在 MPII 中的定义)

2. Alternative drilling methods:

Diamond core drilling (with or without rig, with or without water cooling, with or without roughening procedures) and subsequent cleaning (as defined by the manufacturer in the MPIl).

2. 替代性钻井方法:

金刚石岩心钻探(带或不带钻机,带或不带水冷,带或不带粗加工工序)及后续清洗(按制造商在MPIl中的定义)。

As reference drilling and cleaning method only one method can be defined, for which the complete required test programme in accordance with EAD 330499-02-0601 [11, Table A.1.1 (BF) or Table B.2.1 (BEF) has been conducted. This also applies to extensions for fire or in accordance with Annexes C, E or F (working life 100 years, seismic action, and SFRC). Current practice is to take the rotary hammer drilling method with standard drill bit as reference method. If more than one drilling and cleaning method is used, Annex G describes the required supplementary test programme. It differentiates rotary hammer and alternative drilling methods. A reduced test programme can be executed (Table G.2.1 (BF) or Table G.2.2. (BEF), if equivalence with the reference series can be shown in these series. If equivalence cannot be shown with Tables G.2.1 or G.2.2, additional test series are required (Table G.2.3 (BF), Table G.2.4 (BEF) and Table G.2.5 (BF and BEF for seismic action in accordance with Annex E)).

作为参考,钻探和清洗方法仅可定义一种方法,其完整的所需测试方案需符合EAD330499-02-0601[1]已进行表A.1.1(BF)或表B.2.1(BEF)中的试验。这也适用于火灾扩展情况,或根据附件C、E或F(使用寿命100年、地震作用和SFRC)。现行做法是以标准钻头旋转锤钻孔法作为参考方法。若使用不止一种钻孔和清洁方法,则附件G描述了所需的补充试验方案。它区分了旋转锤和替代钻孔方法。如果能够证明与参考系列具有等效性,则可以执行简化的试验方案(表G.2.1(BF)或表G.2.2(BEF))。如果无法通过表G.2.1或G.2.2证明等效性,则需要额外的试验系列(表G.2.3(BF)、表G.2.4(BEF)以及根据附录E针对地震作用的表G.2.5 (BF和 BEF))。

What is an EAD?什么是EAD?

A European Assessment Document, or EAD for short, is a harmonised technical specification developed by EOTA as the basis for European Technical Assessments (ETAs).上海郜盟提示欧洲评估文件(简称EAD)是由欧洲技术认证组织(EOTA)制定的统一技术规范,作为欧洲技术评估(ETA)的基础。

In combination with the ETA, the EAD provides manufacturers with a way to CE marking for construction products that are not or not fully covered by a harmonised European standard (hEN) under the Construction Products Regulation (EU) 305/2011. The CE marking allows the manufacturer to freely market his product in the entire European Economic Area as well as in Switzerland and Turkey.

结合ETA,EAD为制造商提供了一种对未被或未完全被《建筑产品法规》(EU)305/2011所涵盖的协调欧洲标准(hEN)覆盖的建筑产品进行CE标志认证的途径。获得CE标志后,制造商即可在全部欧洲经济区以及瑞士和土耳其自由销售其产品。

Finished floor or ceiling covering as well as possible sound reducing materials are not part of the kit.

完成的地板或天花板覆盖物以及可能的隔音材料不属于套件的一部分。

This EAD is not applicable when

-timber treatments (preservatives, fire and flame retardants) are used, and/or

-recycled material is used.

此 EAD 在下列情况下不适用:

-木材处理工艺(防腐剂、防火阻燃剂)被应用于其中,且/或

-使用了回收材料。

Concerning product packaging, transport, storage, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.

关于产品的包装、运输、储存、维护、更换和修理事宜,制造商有责任采取相应措施,并在其认为必要的情况下向客户提供有关产品运输、储存、维护、更换及修理方面的建议。

It is assumed that the product will be installed according to the manufacturer's product installation instructions (MPl) or (in absence of such instructions) according to the usual practice of the building professionals

假定该产品将按照制造商的产品安装说明(MPl)进行安装,或者在无此类说明的情况下,则按照建筑专业人员的惯常做法进行安装

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document, shall be considered for the determination of the performance and detailed in the ETA.

对于本欧洲评估文件所涵盖产品的性能判定,应考虑相关制造商的规定,这些规定会对产品性能产生影响,相关内容将在 ETA 中予以详细阐述。

 

用于混凝土的粘结紧固件和粘结膨胀紧固件ce认证法规-ETA认证

用于混凝土的粘结紧固件和粘结膨胀紧固件产品出口欧盟需要满足CPR建材法规要求:

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

 

用于混凝土的粘结紧固件和粘结膨胀紧固件ce认证模式

TAB机构测试+ETA认证, 由欧盟公告机构进行工厂审核后发证

制造商职责:

Factory production control (FPC)工厂生产控制;

Further testing of samples taken at the factory工厂取样的进一步检验

Notified Body

公告机构职责:

Initial inspection of factory and FPC 工厂和FPC的初始检查;

Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.

Technical Assessment Bodies (TABs)

TAB机构职责

European Technical Assessments (ETAs) are issued by Technical Assessment Bodies (TABs) designated for the relevant product area by the EU Member and Partner States in accordance with the Construction Products Regulation (EU) No 305/2011.欧洲技术评估(eta)由欧盟成员国和伙伴国根据建筑产品法规(EU) No 305/2011为相关产品领域指定的技术评估机构(TABs)发布。

 

 

 

用于混凝土的粘结紧固件和粘结膨胀紧固件ce认证测试哪些项目

4779a70a-8a5f-440e-b939-97405b7622ae

 

 

EAD认证流程

IMG_256

 

 

 

用于混凝土的粘结紧固件和粘结膨胀紧固件ce认证机构

公告号机构NB1922,拥有欧盟全品类建材产品授权,上海郜盟拥有该机构直接授权,上海办公室审核员可直接代表机构进行工厂审核,大大减少工厂的差旅成本和时间成本

NB1922欧盟官网资质:

NB1922

 

上海郜盟,专业CE认证服务,丰富的行业经验以及专业的工程师可帮助中国工厂快速通过合规评定,取得CE证书!!

 


 

 

【行动号召】

·       如果您正在面临CE、UKCA等认证难题,欢迎联系上海郜盟获取免费预评估!

·       关注我们,获取更多成功案例与行业合规指南。

 


 

 

📞 咨询热线:021-34122669 021-34126062  

📩 **扫码获取免费CE认证评估方案**

 

 

img6

EAD 330499-02-0601-v01: 2024用于混凝土的粘结紧固件和粘结膨胀紧固件CE认证/ETA认证详解

新闻中心

 

INFORMATION CENTER

专业国际检测认证机构

뀰

021-34122669

18018853504