上海郜盟专业CE认证为您解读：塑料橡胶机械CE认证- EN 12409:2008+A1:2011详解-MD：认证指令，认证标准，适用范围，测试项目，认证流程

 

 

 

1、塑料橡胶机械欧盟CE认证指令

MD机械指令：2006/42/EC

 

2、塑料橡胶机械欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety requirements塑料和橡胶机械.热成型机.安全要求

 

3、EN 12409:2008+A1:2011适用范围：

This European Standard deals with all significant hazards, hazardous situations and events relevant to thermoforming machines for continuous sheet and single sheets of thermoplastics materials, when they are used as intended and under conditions of misuse which are foreseeable by the manufacturer (see Clause 4). A thermoforming machine may consist of a forming unit or a forming unit linked to one or more additional units. This standard covers the following units: continuous sheet unwind unit; single sheet feed unit; material intake; conveying equipment; heating unit; preheating unit; edge heating unit; component feeding/inserting unit; forming station; finishing station; stacking station; discharge station; residual sheet winding unit; sheet cutting unit. This European standard does not apply to units mounted upstream or downstream of the thermoforming machine: which have a separate control system; and/or are located separately. NOTE 1 This European Standard specifies requirements for machines supplied as a single forming unit or a number of units designed to operate as a single machine. Additional units that may be introduced at a later stage should be considered separately applying relevant standards and taking into account any hazards arising through their interaction with the thermoforming machine. This European Standard does not apply to units which are integrated into form, fill and seal machines. These are covered in EN 415-3:1999. This European standard does not apply to units which incorporate heating systems which are fuelled by gas. NOTE 2 Thermoforming machines generally do not create explosive atmospheres. In principle they therefore correspond with line F of Table 2 of the ATEX Guideline and consequently do not fall within the scope of Directive 94/9/EC. This European Standard is not applicable to thermoforming machines which are manufactured before the date of its publication as EN. 上海郜盟提醒您，本欧洲标准涉及与热塑性塑料连续片材和单张片材的热成型机相关的所有重大危险、危险情况和事件，当它们按预期使用时，以及在制造商可预见的误用情况下（见第4条）。热成型机可包括成型单元或连接到一个或多个附加单元的成型单元。本标准包括以下装置：连续片材放卷装置；单张纸进给单元；材料摄入；输送设备；加热单元；预热装置；边缘加热单元；部件进给/插入单元；成型工位；终点站；堆垛站；排放站；残纸缠绕装置；片材切割单元。本欧洲标准不适用于安装在热成型机上游或下游的装置：其具有单独的控制系统；和/或单独定位。注1：本欧洲标准规定了作为单个成型装置或设计为作为单个机器运行的多个装置提供的机器的要求。后期可能引入的其他装置应单独考虑，应用相关标准，并考虑到与热成型机相互作用产生的任何危险。本欧洲标准不适用于集成在成型、填充和密封机器中的装置。EN 415-3:1999中涵盖了这些内容。本欧洲标准不适用于包含燃气加热系统的装置。注2：热成型机通常不会产生爆炸性环境。原则上，它们符合ATEX指南表2的F行，因此不属于指令94/9/EC的范围。本欧洲标准不适用于在其发布为EN之前制造的热成型机。                                                                                                                                                                                   

 

4、EN 12409:2008+A1:2011 欧盟CE认证测试、检查项目

 

5、塑料橡胶机械CE认证流程

1 提交CE申请

2 准备测试样机和技术资料

3 样机测试与整改

4 技术资料审核与整改

5 公告机构审核通过后，工厂获得CE证书

6 设备加贴CE标识，顺利在欧盟市场流通

上海郜盟-欧盟公告机构授权-专业CE认证

 

6 了解更多：

机械设备CE认证

CE认证是什么认证？

欧盟CE认证

EN60204机械电气安全要求-机械厂家必须要了解的干货！！！

 

 

上海郜盟，专业CE认证技术服务公司，致力于中国制造全球化服务！提供权威CE认证机构-欧盟公告号机构机械设备CE认证服务，高效可靠！

 

未经允许不得转载！

 

详情咨询021-34122669，021-34120602