上海郜盟专业CE认证为您解读:
1、无螺纹机械紧固件用装配电动工具欧盟CE认证指令
MD机械指令:2006/42/EC
2、无螺纹机械紧固件用装配电动工具欧盟CE认证标准:
EN ISO 12100:2010 机械安全 - 用于设计的一般准则-风险评估及风险降低
EN 60204-1:2018 机械安全.机械电气设备.第1部分:一般要求
EN ISO 11148-1:2011 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) 手持式非电动工具.安全要求.第1部分:无螺纹机械紧固件用装配电动工具(ISO 11148-1-2011)
3、EN ISO 11148-1:2011适用范围:
This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter “assembly power tools for non-threaded mechanical fasteners”) intended for installation, tightening or removal of both breakstem and non-breakstem rivets, bolts, plugs and fasteners from one side of a workpiece into metals, plastics and other materials. The assembly power tools for non-threaded mechanical fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g., a balancer. NOTE 1 At the time of publication, no assembly power tools for non-threaded mechanical fasteners driven by internal combustion engines are known. Once these are identified, it is intended to amend this part of ISO 11148 to include such power tools. This part of ISO 11148 is applicable to: breakstem fastener, rivet or plug tools; breakstem lockbolt tools; mandrel loaded riveting tools; rivet nut setters. NOTE 2 For examples of assembly power tools for non-threaded mechanical fasteners, see Annex B. This part of ISO 11148 is not applicable to special requirements and modifications of hand-held power tools for the purpose of mounting them in a fixture. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events relevant to assembly power tools for non-threaded mechanical fasteners when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of power tools in potentially explosive atmospheres. NOTE 3 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.
上海郜盟专业认证ISO 11148的本部分规定了手持式非电动工具(以下简称“非螺纹机械紧固件装配电动工具”)的安全要求,该工具用于将断杆和非断杆铆钉、螺栓、塞子和紧固件从工件一侧安装、拧紧或拆除到金属、塑料和其他材料中。用于非螺纹机械紧固件的装配动力工具可以由压缩空气、液压流体或内燃机提供动力,并且打算由一名操作员使用,并由操作员的手支撑,有或没有悬架,例如平衡器。注1:在出版时,还不知道内燃机驱动的非螺纹机械紧固件的装配电动工具。一旦识别出这些工具,就打算修改ISO 11148的这一部分,以包括此类电动工具。ISO 11148的这一部分适用于:断杆紧固件、铆钉或塞子工具;断杆锁紧螺栓工具;心轴加载铆接工具;铆钉螺母固定器。注2:关于非螺纹机械紧固件的装配电动工具示例,请参见附录B。ISO 11148的这一部分不适用于将手持电动工具安装在夹具中的特殊要求和修改。ISO 11148的这一部分涉及与非螺纹机械紧固件的电动工具组装相关的所有重大危险、危险情况或危险事件,当电动工具按预期使用时,以及在制造商可合理预见的误用情况下,电动工具在潜在爆炸性环境中的使用除外。注3 EN 13463-1给出了潜在爆炸性环境中非电气设备的要求。
5、无螺纹机械紧固件用装配电动工具CE认证流程
1 提交CE申请
2 准备测试样机和技术资料
3 样机测试与整改
4 技术资料审核与整改,上海郜盟专业指导
5 公告机构审核通过后,工厂获得CE证书
6 设备加贴CE标识,顺利在欧盟市场流通
上海郜盟-欧盟公告机构授权-专业CE认证
了解更多:
上海郜盟,专业CE认证技术服务公司,致力于中国制造全球化服务!提供权威CE认证机构-欧盟公告号机构机械设备CE认证服务,高效可靠!
未经允许不得转载!
详情咨询021-34122669,021-34120602