专业国际检测认证机构

021-34122669

18018853504

欧盟CE认证

EU CE CERTIFICATION

客户案例

技术交流

上海郜盟专业CE认证为您解读

 

1、飞机千斤顶欧盟CE认证指令

MD机械指令:2006/42/EC

 

2、飞机千斤顶欧盟CE认证标准:

EN ISO 12100:2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1:2018 机械安全.机械电气设备.第1部分:一般要求

EN 12312-19:2005+A1:2009  Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions飞机地面支持设备.特殊要求.第19部分:飞机千斤顶、车轴千斤顶和液压尾柱

 

3、EN 12312-19:2005+A1:2009 适用范围:

This document specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of aircraft jacks, axle jacks and hydraulic tail stanchions when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This document applies to: all types of aircraft jacks; axle jacks and hydraulic tail stanchions designed to be used at specific jacking points on the aircraft (examples see Annex A). NOTE A tail stanchion type is intended to be used with one type of aircraft. This document does not apply to aircraft recovery equipment. This document does not establish requirements for noise and vibration. Noise and vibration are dealt with respectively in EN 1915-4 and EN 1915-3. This Part of EN 12312 is not applicable to aircraft jacks, axle jacks and hydraulic tail stanchions which are manufactured before the date of publication of this document by CEN. This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4.上海郜盟提醒您,本文件规定了在按照制造商或其授权代表给出的规范进行飞机千斤顶、车轴千斤顶和液压尾柱的调试、操作和维护过程中,将第4条所列危险降至最低的技术要求。它还考虑了当局、飞机和地面支持设备(GSE)制造商以及航空公司和处理机构认为至关重要的一些性能要求。本文件适用于:所有类型的飞机千斤顶;设计用于飞机特定顶升点的轴千斤顶和液压尾柱(示例见附录A)。注:尾柱类型拟用于一种类型的飞机。本文件不适用于飞机回收设备。本文件未规定噪声和振动要求。噪声和振动分别在EN 1915-4和EN 1915-3中进行了处理。EN 12312的本部分不适用于CEN发布本文件之前制造的飞机千斤顶、车轴千斤顶和液压尾柱。EN 12312的本部分旨在与EN 1915-1、EN 1915-2、EN 1915-3(车辆)和EN 1915-4结合使用。

5、飞机千斤顶CE认证流程

1 提交CE申请

2 准备测试样机和技术资料

3 样机测试与整改

4 技术资料审核与整改上海郜盟专业指导

5 公告机构审核通过后,工厂获得CE证书

6 设备加贴CE标识,顺利在欧盟市场流通

上海郜盟-欧盟公告机构授权-专业CE认证

了解更多:

机械设备CE认证

CE认证是什么认证?

欧盟CE认证

 

上海郜盟,专业CE认证技术服务公司,致力于中国制造全球化服务!提供权威CE认证机构-欧盟公告号机构机械设备CE认证服务,高效可靠!

 

未经允许不得转载!

 

详情咨询021-34122669021-34120602

飞机千斤顶CE认证- EN 12312-19:2005+A1:2009 详解-MD