上海郜盟专业CE认证为您解读：

1、隧道掘进机欧盟CE认证指令

MD机械指令：2006/42/EC

2、隧道掘进机欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN 12336:2005+A1:2008  Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements隧道掘进机.盾构机、推力钻孔机、螺旋钻孔机、衬砌安装设备.安全要求

3、EN 12336:2005+A1:2008 适用范围：

1.1 Description of the machines

This European Standard is applicable to all types of shield machines and associated back up equipment, thrust boring machines, auger boring machines and lining erection equipment. It specifies the essential safety requirements for the design, installation, maintenance, and information for use of such machines. Shield machines and associated back up equipment include: open shields for both manual and mechanical excavation; shielded tunnel boring machines; micro tunnelling machines; towed or stationary back up equipment; pipe jacking equipment. All shield machines provide lateral and radial ground support. In addition, they may provide various types of face support and ground water control (see Clause 3).

Certain associated matters are not included in the scope of the standard: additional equipment which may form an integral part of a shield machine or back up equipment and is used for compressed air (hyperbaric/plenum) working (see EN 12110:2002); use under hyperbaric conditions; the supply of electricity up to the machine; ancillary tools and equipment used for, at or on the machine; electromagnetic compatibility; loading and transport equipment which is not an integral part of the machine, e.g. rolling stock, man riders, grout cars, segment cars, muck cars.

NOTE Within the European Union Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present document is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.

1.2 Hazards

This European Standard deals with significant hazards, hazardous situations and events relevant to shield machines and associated back up equipment, thrust boring machines and auger boring machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).

1.3 Validity

This European Standard is not applicable to machines which are manufactured before the date of publication of this European Standard by CEN.

1.1机器说明

本欧洲标准适用于所有类型的盾构机和相关备用设备、推力镗床、螺旋钻镗床和衬砌安装设备。它规定了此类机器的设计、安装、维护和使用信息的基本安全要求。盾构机和相关备用设备包括：用于手动和机械开挖的开放式盾构；盾构隧道掘进机；微型隧道掘进机；拖曳式或固定式备用设备；顶管设备。所有盾构机均提供侧向和径向地面支撑。此外，他们可以提供各种类型的工作面支撑和地下水控制（见第3条）。

某些相关事项不包括在本标准的范围内：可能构成盾构机或备用设备的组成部分并用于压缩空气（高压/增压）工作的附加设备（见EN 12110:2002）；在高压条件下使用；向机器供电；用于机器的辅助工具和设备；电磁兼容性；非机器组成部分的装载和运输设备，如机车车辆、载人人员、灌浆车、分段车、渣土车。

注：在欧盟指令94/9/EC中，关于潜在爆炸性环境中使用的设备和保护系统的指令可适用于本欧洲标准所涵盖的机器或设备类型。本文件无意提供符合指令94/9/EC基本健康和安全要求的方法。

1.2危险

本欧洲标准处理与盾构机和相关备用设备、推力镗床和螺旋钻镗床相关的重大危险、危险情况和事件，这些设备在制造商预期的条件下按预期使用（见第4条）。

1.3有效性

本欧洲标准不适用于CEN发布本欧洲标准之前制造的机器。

5、隧道掘进机CE认证流程

1 提交CE申请

2 准备测试样机和技术资料

3 样机测试与整改

4 技术资料审核与整改，上海郜盟专业指导

5 公告机构审核通过后，工厂获得CE证书

6 设备加贴CE标识，顺利在欧盟市场流通

上海郜盟-欧盟公告机构授权-专业CE认证

了解更多：

机械设备CE认证

CE认证是什么认证？

欧盟CE认证

上海郜盟，专业CE认证技术服务公司，致力于中国制造全球化服务！提供权威CE认证机构-欧盟公告号机构机械设备CE认证服务，高效可靠！

未经允许不得转载！

详情咨询021-34122669，021-34120602