上海郜盟为您专业解读无线电遥控器CE认证：

1、无线电遥控器CE认证指令

MD机械指令：2006/42/EC

2、无线电遥控器CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018机械安全.机械电气设备.第1部分：一般要求

EN 17067:2018 Forestry machinery - Safety requirements on radio remote controls 林业机械.无线电遥控器的安全要求

3、EN 17067:2018适用范围：

This document specifies both common and machine specific requirements for cableless control systems for use with the following forestry machinery.

— forestry cable winches according to ISO 19472, winches for log splitters;

— self-propelled machinery for forestry according to EN ISO 11850 (machines for felling, moving and debranching, forwarders, log loaders, skidders, processors, harvesting machines, mulchers as well as multipurpose machines of these construction types, as described in ISO 6814); the definitive part of the standard defines essential requirements for the driving function of the machine;

— mobile yarders for timber logging corresponding to EN 16517;

— log splitters and combined firewood splitters according to EN 609-1:2016, 5.9.2.1 Chipping machines according to EN 13525 and chipping machines with mechanical feed systems for the production of woodchips and shredding /grinding machines;

— forestry boom loaders and similar devices that are used on self-propelled machinery and trailers for forestry according to EN ISO 11850 and, as indicated above, for timber transport, timber loading, the loading of forestry goods or forestry products as well as for the handling and arrangement of timber harvesters, felling attachments, machines for felling and moving,attachments, saw heads, gripper-saw combinations with or without load or similar devices and machines, insofar they are not dealt with in EN 12999. Forestry boom loaders can be a component of the forestry machine on which they are mounted.

This document deals with significant hazards (as listed in Annex ZA), hazardous situations and events relevant to cableless control systems used with the above specific forestry machinery when used as intended and under the conditions of misuse foreseeable by the manufacturer.

NOTE General requirements for cableless controls for machinery are given in the standard EN 62745 and these are applicable to cableless control systems of forestry machinery.

This document deals only with the remote operation of machines. Risk reduction (protective) measures related to the operations carried out by the machine are specified in machine specific standards.

This document is not applicable to cableless control systems for forestry machinery manufactured before the date of its publication.

本文件规定了与以下林业机械一起使用的无缆控制系统的通用要求和机器特定要求。

--符合ISO 19472的林业电缆绞车，用于原木分割机的绞车；

--符合EN ISO 11850的林业自走式机械（ISO 6814中所述的伐木、移动和脱枝机械、货运代理、原木装载机、集材机、加工商、收割机、覆盖机以及这些结构类型的多用途机器）；标准的最终部分定义了机器驱动功能的基本要求；

--符合EN 16517标准的木材采伐用移动式码垛机；

--符合EN 609-1:2016的原木劈裂机和组合式柴火劈裂机，符合EN 13525的切块机，以及用于生产木片和切碎/研磨机的带机械进料系统的切块机；

--根据EN ISO 11850，用于林业自走式机械和拖车的林业臂架式装载机和类似装置，如上所述，用于木材运输、木材装载、林业货物或林业产品的装载，以及用于木材收割机、伐木附件、伐木和移动机器、附件、锯头、带负载或无负载的夹锯组合或类似装置和机器的搬运和布置，只要它们在EN 12999中没有涉及。林业臂架装载机可以是安装在其上的林业机器的一个部件。

本文件涉及在制造商可预见的误用条件下按预期使用时与上述特定林业机械一起使用的无缆控制系统相关的重大危险（如附件ZA所列）、危险情况和事件。

注：标准EN 62745给出了机械无缆控制的一般要求，这些要求适用于林业机械的无缆控制系统。

本文档仅涉及机器的远程操作。机器特定标准中规定了与机器操作相关的风险降低（保护）措施。

本文件不适用于在其发布日期之前制造的林业机械无缆控制系统。