上海郜盟为您专业解读链锯CE认证：

1、链锯CE认证指令

MD机械指令：2006/42/EC

2、链锯CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018机械安全.机械电气设备.第1部分：一般要求

EN 62841-4-1:2020 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4- 1: Particular requirements for chain

saws电动手持式工具、移动式工具和草坪和花园机械的安全第4-1部分：链条的特殊要求

锯

3.EN 62841-4-1:2020适用范围：

This standard applies to chain saws for cutting wood and designed for use by one person.

This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine.

This standard does not apply to

– chain saws for tree service as defined in ISO 1 1 681 -2; or

– pole-mounted pruners.

NOTE 1 01 Pole-mounted pruners will be covered by a future part of IEC 62841 .

The chain saws covered by this standard are designed only to be operated with the right hand on the rear handle and the left hand on the front handle.

本标准适用于为单人使用而设计的用于切割木材的链锯。

本标准不包括设计用于与导板和开刀配合使用或以任何其他方式（如与支架配合使用或作为固定或可运输机器）使用的链锯。

本标准不适用于

ISO 1 1 681-2中定义的树木用链锯；或

–杆式修剪机。

注1 01杆式修剪器将由IEC 62841的未来部分涵盖。

本标准涵盖的链锯仅设计为右手放在后手柄上，左手放在前手柄上操作。

4.EN 62841-4-1:2020欧盟CE认证测试、检查项目

Radiation, toxicity and similar hazards	辐射、毒性和类似危害
Protection against access to live parts	防止接触带电部件
Resistance to heat and fire	耐热性和耐火性
Overload protection of transformers and associated circuits	变压器和相关电路的过载保护
Supply connection and external flexible cords	电源连接和外部软线
Terminals for external conductors	外部导线用接线端子
Creepage distances, clearances and distances through insulation	爬电距离、间隙和绝缘距离