上海郜盟为您专业解读提升袋系统CE认证：

 

 

1、提升袋系统欧盟CE认证指令-上海郜盟专业CE认证

MD机械指令：2006/42/EC

 

2、提升袋系统欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018机械安全.机械电气设备.第1部分：一般要求

EN 13731:2007 Lifting bag systems for fire and rescue service use - Safety and performance

requirements 消防和救援用提升袋系统.安全和性能要求-上海郜盟提供专业CE认证

 

3、EN 13731:2007 适用范围：上海郜盟专业CE认证技术服务

This European Standard specifies requirements for lifting bag systems, where intended operation is inflation by compressed air and used primarily by fire and rescue services.

This European Standard applies to lifting bag systems including some or all of the following components:

 hose assemblies and couplings;

 regulators;

 control devices;

 pressure indicators;

 safety valves;

 lifting bags.

This European Standard applies to lifting bag systems intended for operation under ambient temperatures between -20 °C and 55 °C.

This European Standard deals with all significant hazards, hazardous situations and events during the commissioning, operation and maintenance arising from a lifting bag system when it is used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.

This European Standard specifies minimum performance requirements and test methods for lifting bag systems.

This European Standard does not establish the additional requirements for:

a) operation in severe conditions ( e.g. extreme environmental conditions such as: temperatures outside the range from -20 °C to + 55 °C, corrosive environment, tropical environment, contaminating environments,strong magnetic fields, potentially explosive atmospheres);

NOTE 1  If use of the lifting bag system is foreseen in severe conditions, this should be agreed between the purchaser and the manufacturer at the time of ordering. In this case an additional risk analysis should be carried out. Additional measures and additional information for use may be necessary.

b) risk directly arising from any means for handling or transportation of the lifting bag system by equipment other than that designed as part of the lifting bag;

c) lifting bag systems manufactured for specialized use, e.g. the lifting of persons or heavy recovery where exceptional stroke movement is required;

d) any hazard arising from the source of compressed air, except where this is a manually operated air pump.

NOTE 2  Where the source is from an air compressor or from a pressurised cylinder or other similar source, it is assumed that the source conforms to an appropriate European Standard or legislation.

This European Standard is not dealing with noise, as it is not considered to be a significant hazard.

This European Standard is not applicable to lifting bag systems which are manufactured before the date of its publication by CEN.

上海郜盟提示本欧洲标准规定了提升袋系统的要求，其中预期操作是通过压缩空气充气，主要用于消防和救援服务。

本欧洲标准适用于包括以下部分或全部部件的提升袋系统：

 软管组件和接头；

 监管者；

 控制装置；

 压力指示器；

 安全阀；

 搬运行李。

本欧洲标准适用于拟在-20°C至55°C的环境温度下运行的提升袋系统。

本欧洲标准处理了在试运行、操作和维护期间，当起重袋系统按预期使用时，在制造商合理可预见的误用条件下产生的所有重大危险、危险情况和事件。

本欧洲标准规定了提升袋系统的最低性能要求和试验方法。

本欧洲标准未规定以下方面的附加要求：

a） 在恶劣条件下运行（例如极端环境条件，如：-20°C至+55°C范围外的温度、腐蚀性环境、热带环境、污染环境、强磁场、潜在爆炸性环境）；

注1：如果预计在恶劣条件下使用提升袋系统，则应在订购时由买方和制造商达成一致。在这种情况下，应进行额外的风险分析。可能需要额外的措施和额外的使用信息。

b） 由除设计为提升袋一部分的设备以外的设备搬运或运输提升袋系统的任何方式直接产生的风险；

c） 为特殊用途制造的提升袋系统，例如需要特殊行程的人员提升或重型回收；

d） 压缩空气源引起的任何危险，手动操作的空气泵除外。

注2：若气源来自空气压缩机或加压气缸或其他类似气源，则假定气源符合适当的欧洲标准或法规。

本欧洲标准不涉及噪音，因为它不被视为重大危险。

本欧洲标准不适用于CEN发布日期之前制造的升降袋系统。

 

4. EN 13731:2007欧盟CE认证测试、检查项目

5、提升袋系统CE认证流程

1 提交CE申请

2 准备测试样机和技术资料

3 样机测试与整改

4 技术资料审核与整改，上海郜盟全程指导

5 公告机构审核通过后，工厂获得CE证书

6 设备加贴CE标识，顺利在欧盟市场流通

上海郜盟-欧盟公告机构授权-专业CE认证

 

 

了解更多：

机械设备CE认证

CE认证是什么认证？

欧盟CE认证

 

上海郜盟，专业CE认证技术服务公司，致力于中国制造全球化服务！提供权威CE认证机构-欧盟公告号机构机械设备CE认证服务，高效可靠！

 

原创文章，严禁转载！

 

详情咨询021-34122669，021-34120602