上海郜盟为您专业解读冷轧机CE认证：

1、冷轧机CE认证指令

MD机械指令：2006/42/EC

2、冷轧机CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018机械安全.机械电气设备.第1部分：一般要求

EN 15094:2008 Safety of Machinery - Safety requirements for hot flat rolling mills 机械安全.冷轧机的安全要求

EN 15094:2008适用范围：

This European Standard defines the general safety requirements for hot rolling mills for flat products as defined in 3.1.

This European Standard deals with significant hazards, hazardous situations and events relevant to hot rolling mills for flat products. It deals not only with circumstances where the machinery is used as intended, but also includes other conditions foreseen by the manufacturer, such as foreseeable faults, malfunctions or misuse (see Clauses 4 and 5).

This European standard applies to: Machinery and equipment used for the manufacturing of metal hot rolled flat products from the material supply from (1), via the mill stands (2), to the exit (5) (see Figure 1).

The following equipment is outside the scope of this standard:

 furnaces in accordance with EN 746-1, EN 746-2 and EN 746-3;

 continuous casting machines according to EN 14753;

 hook conveyors according to EN 619;

 roll shop equipment;

 storage equipment (e. g., high-bay warehouses);

 cranes, fork lifts, trucks and railway trucks and other vehicles.

This European standard is not applicable to hot rolling mills for flat products, manufactured before the date of publication of this standard by CEN.

本欧洲标准定义了3.1中定义的扁平产品热轧机的一般安全要求。

本欧洲标准涉及与扁平产品热轧机相关的重大危险、危险情况和事件。它不仅涉及机器按预期使用的情况，还包括制造商预见的其他情况，如可预见的故障、失灵或误用（见第4条和第5条）。

本欧洲标准适用于：用于制造金属热轧扁平产品的机械和设备，从（1）的材料供应，通过轧机机架（2），到出口（5）（见图1）。

以下设备不在本标准范围内：

符合EN 746-1、EN 746-2和EN 746-3的炉子；

符合EN 14753的连铸机；

符合EN 619的钩式输送机；

轧钢车间设备；

存储设备（例如高架仓库）；

起重机、叉车、卡车和铁路卡车等车辆。

本欧洲标准不适用于CEN发布本标准之前制造的扁平产品热轧机。