上海郜盟为您专业解读电动移动式货架CE认证:
1、电动移动式货架CE认证指令
MD机械指令:2006/42/EC
2、电动移动式货架CE认证标准:
EN ISO 12100:2010 机械安全 - 用于设计的一般准则-风险评估及风险降低
EN 60204-1:2018机械安全.机械电气设备.第1部分:一般要求
EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements电动移动式货架和货架、旋转木马和储物电梯安全要求
3、EN 15095:2007+A1:2008适用范围:
1.1 This European Standard deals with the safety requirements for the following types of power-operated
storage equipment:
storage carousels;
storage lifts;
mobile shelving, pallet racking and cantilever racking
with the objective of eliminating or minimising the hazards described in Clause 4. These hazards can arise during installation, starting up, operation, maintenance, testing and dismantling of the equipment.
1.2 It is essential that the safety requirements and/or measures taken in this standard be applied to storage equipment which operates indoors. Under difficult conditions, it is essential that additional hazard analysis and safety measures be taken into account, e. g. outdoor conditions, freezer applications, high temperatures, corrosive environment, strong magnetic fields, risk of explosive atmosphere, radioactive conditions, storage goods which due to their nature could generate hazardous situations (e. g. molten metal, acids/alkalis, fragile goods or explosives), effects of earthquakes and also contact with food.
1.3 Examples of power-operated storage equipment to which this standard applies are shown in Annex A.
1.4 With regard to buildings and parts of buildings, this standard applies only insofar that an assessment regarding hazards and risks in connection with interfaces to the storage equipment is carried out.
1.5 Storage equipment whose only power source is directly used human labour or gravity are excluded from the scope of application of this standard.
1.6 Power-operated storage equipment or parts of them do not fall under the regulations for passenger lifts.
They are intended to handle and store goods. They are not intended to transport passengers under normal use (except for maintenance) and therefore not considered to be lifts (elevators).
1.7 This standard does not take hazards into account, which arise from noisy environments or environments subject to electromagnetic interference outside the range quoted in EN 61000-6-2.
1.1本欧洲标准涉及以下类型动力操作的安全要求
存储设备:
"储物转盘;
"储物电梯;
"移动货架、托盘货架和悬臂式货架
目的是消除或尽量减少第4条所述的危害。这些危险可能发生在设备的安装、启动、操作、维护、测试和拆卸过程中。
1.2本标准中采取的安全要求和/或措施必须适用于室内操作的存储设备。在困难条件下,必须考虑额外的危害分析和安全措施,例如室外条件、冷冻应用、高温、腐蚀性环境、强磁场、爆炸性环境风险、放射性条件、储存因其性质而可能产生危险情况(如熔融金属、酸/碱、易碎品或爆炸物)、地震影响以及与食品接触的货物。
1.3本标准适用的电动储能设备示例见附件A。
1.4对于建筑物和建筑物的部分,本标准仅适用于对与存储设备接口相关的危害和风险进行评估的情况。
1.5仅由人力或重力直接供电的存储设备不在本标准的适用范围内。
1.6电动储能设备或其部件不受客梯规定的约束。
它们旨在处理和储存货物。它们不打算在正常使用情况下运送乘客(维护除外),因此不被视为电梯。
1.7本标准不考虑噪声环境或受EN 61000-6-2引用范围之外的电磁干扰环境造成的危害。
5、电动移动式货架CE认证流程
1 提交CE申请
2 准备测试样机和技术资料
3 样机测试与整改
4 技术资料审核与整改,上海郜盟专业认证
5 公告机构审核通过后,工厂获得CE证书
6 设备加贴CE标识,顺利在欧盟市场流通
上海郜盟-欧盟公告机构授权-专业CE认证
了解更多:
上海郜盟,专业CE认证技术服务公司,致力于中国制造全球化服务!提供权威CE认证机构-欧盟公告号机构机械设备CE认证服务,高效可靠!
未经允许不得转载!
详情咨询021-34122669,021-34120602