上海郜盟为您专业解读牵引辅助绞车CE认证：

1、牵引辅助绞车CE认证指令

MD机械指令：2006/42/EC

2、牵引辅助绞车CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018机械安全.机械电气设备.第1部分：一般要求

EN ISO 19472-2:2022 Machinery for forestry - Winches - Part 2: Traction aid winches 林业机械.绞车.第2部分：牵引辅助绞车

3、EN ISO 19472-2:2022适用范围：

This document defines the dimensions and specifies the performance and safety requirements for traction aid winches used in forestry for assisting supported machines while going uphill and downhill(pulling and braking).

This document is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814:2009 and earth moving machinery as defined in ISO 6165:2012. It is also applicable to remote traction aid winch systems which are installed on a position away from the supported machine. In addition, this document defines requirements for the assembly of supported machine and traction aid winch. It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aid winch does not limit the applicability of this document. This document is intended to be applied to traction aid systems used on machines where, without use of these systems, the machine remains stationary on slopes under its independent control (see Annex E).

Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements for the safety of many types of supported machines are within the scope of ISO 11850:2011.

This document is not applicable to traction aid winches manufactured before the date of its publication.

本文件定义了林业中用于在上坡和下坡（牵引和制动）时辅助被支撑机器的牵引辅助绞车的尺寸，并规定了其性能和安全要求。

本文件适用于ISO 6814:2009中定义的移动式和自走式林业机械以及ISO 6165:2012中定义的土方机械使用的固定式和可拆卸式绞车及其部件、连接和通信。它也适用于安装在远离被支撑机器的位置的远程牵引辅助绞车系统。此外，本文件还规定了支撑机器和牵引辅助绞车的组装要求。它不适用于下坡时不使用受控绳索力的绞车，以及用于打滑、起重机吊装作业、拉铲、高铅测井、绳索测井系统或码垛的绞车。用于驱动牵引辅助绞车的原动机类型并不限制本文件的适用性。本文件适用于机器上使用的牵引辅助系统，在不使用这些系统的情况下，机器在独立控制下在斜坡上保持静止（见附件E）。

ISO 6814:2009中定义的用作锚或支撑机器的林业机器不在本文件的范围内。许多类型的支撑机器的安全要求在ISO 11850:2011的范围内。

本文件不适用于在其发布日期之前制造的牵引辅助绞车。